Hidrizolatie flex. pt. int.+ext. WeberTec SuperFlexD2 24kg

Product code: APN-3396
Delivery time:
Check to see when you can receive your order.
Benefits:
See some advantages of purchasing from PIATRAONLINE:
  • generic
    Door-to-door delivery
  • generic
    Huge stocks available
  • generic
    6 days call center help
  • generic
    More than 40.000 happy clients
Suggest to your friends:
Did you like this product? Or you need another opinion? Share this on your social networks.
info
Order by: 1 x Bag
12844 EUR/Bag
+
Bag
Price without VAT
Product available by order
Preț final:
12844 EUR
Price without VAT
phone_product_help
Need our help?

Product description

Flexible bicomponent water insulation for both the interior and the exterior, most often used on cellar walls made out of brick or concrete, underground walls, concrete walls, foundations etc. It can also be used for sealing the underground walls at the interior as well as for sealing water tanks (found indoor, with water column of maximum 15 m). As a preliminary sealing and binding layer under a polymeric modified bitumen, the water insulation goes on under brickworks and binding layers on old anionic bitumen surfaces. It can also be used as an adhesive for extruded polystyrene, rigid foam tiles and miner fiber tiles. Especially recommended as a sealant underneath natural stone and ceramic claddings.

The Weber.Tec Superflex D2 is a flexible bicomponent water insulation with fast adhesion, based on cement and quartz sand. Contains high reactivity polymers, reactive filling materials and additives.

PACKAGING
2 components, in plastic buckets of 5 kg (60 buckets/pallet).
2 components, in plastic buckets of 20 kg (18 buckets/pallet).

CONSUMPTION:
2.5 kg per sqm, in two layers

SUPPORT PREPARATION: The supporting surface must be clean, undeformable, dry, fixed, free of slippery surfaces (grease, bitumen, tar, dust etc.), must not present frost traces, free of large cracks or lumps. sealed parts and residues which may diminish the adherence must be removed. The margins, edges and corners must be rounded and lumps must be leveled out. The cracks and cavities larger than 5 mm must be closed and filled.

WORK AND PREPARATION METHOD: The flexible Weber.Tec Superflex D2 water insulation is a bicomponent material: a liquid-pasty component and a powder one. Pour one liquid component into a bucket, over which you must add the powder component. Mix the two components using an electric mixer for two-three minutes (at a maximum torque of 800 rpm) until a homogenous paste is obtained. The mixing ratio must be 1:1 in terms of weight. The obtained paste must be applied with a brush, roller, paintbrush, mechanical or steel trowel. In order to obtain a waterproof layer you need to apply at least two layers (3 layers for the surfaces exposed to water under pressure). The first layer of Weber.Tec Superflex D2 must be applied on the entire surface of the support which was prepared in a compact layer (approx. consumption 1,25 kg/m by mm thickness). The minimum layer must be respected in each and every point of the soon to be sealed surface. The following layer can be applied once the first one cannot be deteriorated by applying a new one. In order to ensure a tension-free drying, the quantity on a layer must not be bigger than 1,5 kg/m. On vertical surfaces such as walls, ceramic claddings can be done after approx. 90 minutes while horizontal surfaces such as floors become functional and can be cladded with ceramic tiles after approx. 4 hours since applying the last layer of sealant. Surfaces can be exposed to constant water action after 3 days. The adhesion time is influenced by weather.

RECOMMENDATIONS: All works will be executed at an air and support temperature of +3oC to +30oC and bad weather conditions are to be avoided (rain, snow, strong winds, direct sunlight). In the case of strong sunlight, the water insulation will be applied in a shady area. sealed surfaces will be protected against rain and frost for at least 4 hours since the application. Do not dilute the material with water and do not mix it with other construction materials. The areas surrounding the application surface must be covered with duct tape and protection foil. The used tools must be washed immediately after use.

Product specification

Color
Grey
Color variation
Small
Dimensions
1 x 30cm
Minimum order quantity
1
Packing
Pallet
Product code
APN-3396
Specific observations
Pallet
Suitable for:
Interior - wall cladding
Exterior - wall cladding
Interior - floor covering
Exterior - floor covering
Thickness
+/- 1 cm
Weight (U.M.)
24
Weight per piece (kg)
24

Comments or reviews:

For the moment there are no comments from our users.
Write a comment or a review!
Have you bought or tested this product? We want to know your opinion, either bad or good! Write a review and help other users to make a choice as inspired as yours!
Rating:
star
star
star
star
star
Name
E-mail
Subject
Comment
All the fields are required.
By publishing a review on our site, you agree with our terms and conditions.

Recommended for:

  • Bathroom
  • Kitchen
  • Covered terrace
  • Uncovered terrace
  • Swimming pool
  • Exterior Paving
  • Wet spaces

Suitable for:

  • Interior - wall cladding
  • Exterior - wall cladding
  • Interior - floor covering
  • Exterior - floor covering

PIATRAONLINE certifications

Hidrizolatie flex. pt. int.+ext. WeberTec SuperFlexD2 24kg https://www.piatraonline.com/userfiles/ba2b7a23-180a-4450-af7d-24f81a3361c7/products/3665940_list.jpg Weber Saint Gobain Romania
152.84 EUR Product available by order