Fiberglass mesh used for reinforcement for all types of thermal insulation systems.
Method of preparation and use:
Apply adhesive mortar using a 10 mm notched trowel. In the freshly applied mortar place the fiberglass mesh in vertical strips with a minimum overlap of 10 cm. Using the right side of the stainless steel trowel, fix the mesh in the adhesive mortar. Smoothen out the entire surface ensuring complete coverage of the fiberglass mesh. & ndash; The fiberglass mesh layer will remain in the upper third part of the mortar layer.
Additional reinforcement is recommended in areas with high tensions (the corners of windows) by adding extra strips (20 x 20 cm) diagonally.
Eye size: approx. 4 x 5 mm
Density: 160 g/m2
Width: 1 m
Length: available in 50 m rolls
Traction resistance: ≥2000 N/50mm
Traction resistance after aging: ≥50% of initial value
1 m / sqm
1 roll for 50 sqm
137A Teisani Street, Bucharest - ROMANIA
Our schedule (GMT +02:00 Europe): Monday - Friday: 09.00-18.00 Saturday: 10.00-15.00
Subscribe to our Newsletter for updates: