Weber P37 25 KG - Polystyrene insulating systems adhesive

Product code: APN-25
Delivery time:
Check to see when you can receive your order.
Benefits:
See some advantages of purchasing from PIATRAONLINE:
  • generic
    Door-to-door delivery
  • generic
    Huge stocks available
  • generic
    6 days call center help
  • generic
    More than 40.000 happy clients
Suggest to your friends:
Did you like this product? Or you need another opinion? Share this on your social networks.
info
Order by: 1 x Bag
250 EUR/Bag
+
Bag
Price without VAT
Product available by order
Preț final:
250 EUR
Price without VAT
phone_product_help
Need our help?

Product description

Weber P37 is the number 1 product for gluing expanded polystyrene. It is applied on all conventional surfaces such as concrete, light concrete, porous concrete, cement plaster, cement-lime plaster and old plaster, directly onto any type of masonry. This expanded polystyrene adhesive is recommended for thermal insulation of newly built buildings and old ones that are going to be rehabilitated. Adhesive for expanded polystyrene works will be executed at air temperatures and support from +5 C to +30 C. During the application the surface must be protected from the strong sunlight and rain.

It is used in particular for gluing expanded polystyren pieces. It is applied on surfaces such as concrete, porous concrete, light concrete, plasters, lime-cement plasters and old plasters, directly onto any type of masonry.

Composition:
Grey cement-based powder containing synthetic resin of professional quality. Nontoxic product with high adhesion to the substrate and expanded polystyrene (EPS-F).

Surface it can be applied on:
Concrete, light concrete, porous concrete, cement plaster, cement-lime plaster, old plaster and directly onto any type of masonry.

Support preparations:
Surfaces must be clean, dry, non-deformable and fixed. Polystyrene pieces must be clean and free from grease, oils, dust or other such impurities. If the support surfaces are very porous, they should be watered and then wait until the film of water disappears.

Preparations and how to:
Pour the contents of one bag in about 6.5 liters of water and mix manually or with electric mixer until you get a homogeneous paste. After obtaining the paste, leave it for 5 minutes, then remix for 30 seconds.

The obtained mortar is applied on the polyester's perimeter in edge's length, in several points (3-6) on the rest of the surface so that by pressing the covered surface by adhesive is greater than 40%.

Polystyrene pieces are attached to the wall in connection (type masonry). Fix by manually pressing. Flatness and verticality is adjusted using screed or spirit level.

After adhesive drying, apply anchors and sand polyester pieces..

Recommendations:
Working temperature is between + 50C and + 300C. During work, area must be protected from the strong rays of the sun and rain. cladded surface and used material must not be exposed to frost or rain for 24 hours after application. In cold weather and high humidity installing dowel pins in insulating tiles is done only after waiting for a suitable time (dowel trial).

Characteristics of use:

Waiting time: 5 minutes from mix preparation
Time to use: 2-3 h from mix preparation
This duration is given for a temperature of 20 C and a relative humidity of 65%. Higher values shorten and lengthen the duration.

Contains cement. Makes alkaline reaction with water. Protect eyes and skin. In case of contact with eyes they should be washed with plenty of water and seek a medical specialist's advice.

Technical specifications:
Initial adhesion: >0.5 N/mm2.
Compressive strength: ≥ 7 N/mm2
The mechanical strength of bending tensile: ≥ 1 N/mm2

Validity term:
12 months from date of manufacture when stored on wooden pallets in dry conditions.

Consumption:
Approx. 4-6 kg/sqm depending on the support surface

Product specification

Color variation
Small
Delivery
Order now and we will dispatch it by truck in Europe or by container internationally. Regardless of quantity, our shipping cost will be low. To find out our shipping price, just give us a call.
Minimum order quantity
1 Sack
Packing
Pallet
Packing details
Pallet: 42 bags / 1050 kg
Product code
APN-25
Specific observations
Pallet
Specific observations or benefits
Bag 25kg - Pallet 42 Bags - 1050kg
Suitable for:
Interior - wall cladding
Exterior - wall cladding
Exterior - floor covering
Weight (U.M.)
25
Weight per piece (kg)
25 kg

Comments or reviews:

For the moment there are no comments from our users.
Write a comment or a review!
Have you bought or tested this product? We want to know your opinion, either bad or good! Write a review and help other users to make a choice as inspired as yours!
Rating:
star
star
star
star
star
Name
E-mail
Subject
Comment
All the fields are required.
By publishing a review on our site, you agree with our terms and conditions.

Recommended for:

  • Covered terrace
  • Uncovered terrace
  • Facade / Fence / Home-Base

Suitable for:

  • Interior - wall cladding
  • Exterior - wall cladding
  • Exterior - floor covering

PIATRAONLINE certifications

Similar products

Weber P37 25 KG - Polystyrene insulating systems adhesive https://www.piatraonline.com/userfiles/ba2b7a23-180a-4450-af7d-24f81a3361c7/products/3324736_list.jpg Weber Saint Gobain Romania
2.98 EUR Product available by order