A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits. May be used in dilute or concentrated form. Suitable for interior & exterior use and surfaces such as glazed and un-glazed ceramics, slate, quarry tiles, brick, terracotta & acid resistant natural stones.
LTP Grout Stain Remover Benefits
A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits
Removes residues of grout and rust.
Conveys fresh and clean fragrance
Perfect for interior & exterior use
Direction for use:
In mild cases and on absorbent tiles: Dilute 1 part Grout Stain Remover in 4 parts warm water. Apply with a cloth or sponge wrung out in the solution. Wipe off thoroughly with a clean damp cloth.
In more severe cases: Dilute 1 part Grout Stain Remover in 1 part warm water. Apply liberally and spread over surface of tiles. If necessary, agitate with a scrubbing brush and leave to react for 5-10 minutes, keeping wet with additional Grout Stain Remover solution. Mop up and rinse thoroughly with clean water.
In extremely severe cases: Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralize treated surface with clean water after use.
5-25 sqm per liter
Not suitable for use on surfaces that are calcareous, sensitive to acids (e.g. stainless steel, chrome, enamel etc.), or contain lime (i.e. marble, travertine, limestone, engineered stone & sandstone containing iron). In conditions of extreme humidity LTP Grout Stain Remover vapor may react with acid sensitive surfaces. Any contaminated surface should be rinsed off immediately with plenty of clean water. Do not use when under floor heating systems are in operation.
Important: Always test the solution on a small inconspicuous area prior to general application. When using acid solution, prolonged contact with grout joints should be avoided.