Fiberglass mesh is used to reinforce polysterene based thermal insulation systems.
The fiberglass mesh is also available in a white color with Weber customization.
Method of preparation and use:
Apply adhesive mortar using a 10mm notched trowel. In the freshly applied mortar put a fiberglass mesh in vertical strips with a minimum overlap of 10 cm. Using the straight side of the stainless steel trowel, fix the mesh in the adhesive mortar. Smoothen out the entire surface ensuring complete coverage of the fiberglass mesh & ndash; the fiberglass mesh layer will remain in the upper third part of the mortar layer.
Additional reinforcement is recommended in areas with high tensions (ex. the corners of windows) by adding further strips (20 x 20 cm) diagonally.
Eye size: approx. 4 x 5 mm
Density: 145 g/m2
Width: 1 1 m
Length: available in 50m roles
Traction resistance: ≥2000 N/50mm
Traction resistance after aging: ≥50% of initial value
11 m / sqm surface
137A Teisani Street, Bucharest - ROMANIA
Our schedule (GMT +02:00 Europe): Monday - Friday: 09.00-18.00 Saturday: 10.00-15.00
Subscribe to our Newsletter for updates: