Silicone decorative grouting that can be applied over the base grouting, the smooth insulating grouting or over a thermal insulation system made with polystyrene or mineral wool.
Pasty decorative plaster based on natural raw materials and mineral binder.
The decorative plaster is available in 218 colours according to the color chart
The surface it’s applied on:
It can be applied over the insulation system, the base grouting or over the smooth insulating grouting
Surface must be clean, smooth, homogeneous, stable, fixed, dry and resistant. The surface must also be at maturation age.
Apply a thin coat of weber G700 primer and let it dry for 5-12 hours.
How to prepare and use:
Mix the required amount for a wall (the contents of several buckets) to obtain a more uniform color.
Coatings are applied in a thin layer using a stainless steel trowel. A wall is grouted without interruption. The desired structure is produced by circular or linear troweling using a plastic or polystyrene trowel immediately after application. The final structure is influenced by the layer’s thickness and troweling method.
Working temperature is between 5 C and 30 degrees C.
The fresh grouting should be protected from rain, sunlight or other weather until it dries
The used tools must be washed with water immediately after use. After application, the bucket will be closed tightly so that the rest of the material does not harden.
Time to dry: 24 h
Homogenization time: 1 minute
These times are given for a temperature of 20 C and a relative humidity of 65%. Higher values shorten and lower temperatures increase these times.
Adhesive strength >0 3 N/mm2
Durability (frost resistance) permeability rate : EN 1062-3 REAL 0 5 kg(m2 h 0 5)
fine: 2 3-2 5 kg/sqm
rolling: 2 4-2 6 kg/sqm
medium: 2 9-3 1 kg/sqm
12 months from the date of production if stored away from frost and high temperatures in an airtight bucket
Fine granulation: cca. 2 4 - 2 6 kg/sqm
Medium granulation: cca. 2 9 - 3 1 kg/sqm
Rolling granulation: cca. 2 6 - 2 8 kg/sqm