This ultra-permeable decorative grouting can be applied over the base grouting or smooth insulating grouting, or even over thermal insulation systems made with polystyrene or mineral wool.
The pasty ultra-permeable decorative grouting based on natural raw materials and synthetic resin binder.
The grouting is available in 218 colours according to the color chart.
Surface it’s applied on:
Recommended on the thermal systems exposed to dust, pollution or intense traffic.
Surfaces must be clean, smooth, homogeneous, stable, fixed, dry and resistant.
Surfaces must be at maturation age. Apply a thin coat of Weber G700 primer and let it dry for 5-12 hours.
Preparations and use:
Mix the required amount for a wall (contents of several buckets) to obtain a more uniform color.
Coatings are applied in a thin layer using a stainless steel trowel. A wall is grouted without interruption. The desired structure is produced by circular or linear troweling with a plastic or polystyrene trowel immediately after application. The final structure is influenced by the layer thickness and type of trowel.
Working temperature is between 5 and 30 degrees C.
Fresh grouting should be protected from rain, sunlight or other weather until it dries
Used tools must be washed with water immediately after use. After application, the bucket will be closed tightly so that the remained material does not harden.
30 kg bucket, 720 kg pallets (24 buckets)
Dry time: 24 h
Homogenization time: 1 minute
These times are given for a temperature of 20 C and a relative humidity of 65%. Higher values shorten and lower temperatures increase these times.
Adhesive strength: ≥ 0 3 N/sqmm
Durability (frost resistance) EN 1062-3 REAL <0 5 kg(m2 h0 5)
rolling: 2 mm
fine: 1 5 mm
medium: 2 mm
12 months from date of production if stored away from frost and high temperatures in an airtight bucket.
Fine granulation: 2 4-2 6 kg/sqm
Rolling granulation: 2 6-2 8 kg/sqm
Medium granulation: 2 9-3 1 kg/sqm