Self-leveling cementitious mortar with reinforcing fibers and synthetic resin content. Has increased adherence and it spreads easily. After hardenng, it ensures a smooth, hard, flat surface. Nontoxic product.
Support surface must be clean, non-deformable and have a fixed grip and age of maturity. If appropriate, support is processed mechanically by blasting or milling. Apply a coat of primer binding product weber GR100 1 day prior to the screed.
Work and preparation method:
Pour the contents of one bag in 6 2 liters of water and mix mechanically using an electric mixer with a low speed until getting a homogeneous paste. After obtaining a homogeneous paste, leave it for 2 minutes. Pour the obtained mixture on the prepared surface. Remove air bubbles using a roller with spikes especially for the self-leveling screed. The layer thickness within an application cycle is 2-10 mm. For application in several layers, the next layer is applied only after the previous one has hardened.
Application temperature between + 5 deg C and + 30 deg C. During application, the area must be protected from strong sunlight and rain. It is recommended that the compressive strength of the substrate is at least 15 N / sqmm. Do not apply on wet surfaces. Please respect the recommended amount of water when mixing.
Waiting time after mixing: 2 minutes
Time for application: 10 minutes
Layer thickness: max 10 mm
* if the finish is made with ceramic tiles, they can be applied after about 7 days.
These times are given for a temperature of 20 ° C and a relative humidity of 65%. Higher temperature values shorten these times and the lower values increase these times.
Support adherence: cca. 0 5 N/sqmm
Compression strength: ≥ 20 N/sqmm
Bending tensile strength: cca. 6 N/sqmm
Contraction: max. 2 mm/m
12 months from date of manufacture when stored on wooden pallets in dry conditions.
approx. 1, 6 kg/sqm for a 1mm thick layer
137A Teisani Street, Bucharest - ROMANIA
Our schedule (GMT +02:00 Europe): Monday - Friday: 09.00-18.00 Saturday: 10.00-15.00
Subscribe to our Newsletter for updates: