LTP Mouldex is an intensive cleaner formulated to remove organic stains (mould spores, fungus, algae and moss) developed on grout joints and stone surfaces. It is ideal for wet spaces, bathrooms and kitchens (interior and exterior). With its bleaching action, it helps restore the white grouting to its initial appearance. If you want to use on colored grouting, always test it first on a less visible area.
Benefits
• suitable for interior and exterior use, any type of finish (polished, honed, brushed, splitfaced, flamed, sandblasted etc.);
• also works on surfaces with silicone seals and wet spaces;
Directions for use
Shake well before use.
Surface to be treated must be completely dry before application. Hold upright and spray 5-10 from the surface. Allow to react for 45 minutes, then apply a little water on the surface and agitate with a stiff brush. Rinse thoroughly with sponge and water to remove any traces of water or solution. For stubborn stains, extended treatments are recommended; therefore, apply and leave on surfaces overnight.
Coverage/consumption: approximately 5-15 sqm depending on your type of cladding
Storage: Store upright in a cool, dry, frost free place.
Shelf life: for optimum result, use it within 6 months after opening.
WARNING: Do not use in combination with acid base cleaners!
EQUIPMENTS AND SURFACE EMPLOYED IN THE FOOD INDUSTRY MUST BE CAREFULLY RINSED WITH POTABLE WATER AFTER USING LTP MOULDEX.
KEEP OUT OF REACH OF CHILDREN!
Very toxic for aquatic life. Avoid contact with skin and eyes. If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves, face and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
