Powerful solution which will deeply clean natural stone surfaces, especially recommended after application. Cleaning with LTP Grimex is fit for both interior and exterior use, leaving the surface perfectly dry for the following sealant. Also efficient for removing stains, oils, grease, ingrained dirt and old layers of wax. Fastly shipped with payment at delivery.
The benefits of the LTP GRIMEX etching solution
Efficient for removing oil, grease, ingrained dirt and wax layers.
Ideal for restoring old surfaces (deeply cleans)
Perfect for both interior and exterior use
Easy to use
Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge.
Instructions for use:
In mild cases and on absorbent tiles:
Dilute one part LTP Grimex in 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.
Mop or Rough brush (in the case of more severe dirt)
In more severe cases:
Dilute one part LTP Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water.
In extremely severe cases:
Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.
In easy cases - around 50 sqm
In severe cases - around 20 sqm
In extreme cases - around 5-10 sqm
Storage information: store in a cool, dry, frost-free environment in closed container.
Shelf life: up to 5 years.
This product must not be used for the day to day cleaning of the sealed floors and walls.