Color Intensifier H2O is an eco-friendly impregnator with color-enhancing features. It is ideal for interior and exterior areas, polished and unpolished surfaces of natural and artificial stone, ceramic, concrete, brick, and quarry stone. You can use it on walls and floors in bathrooms, kitchens, living rooms, bedrooms, hallways, garages, terraces, and balconies.
Benefits
- protects surfaces from dust, water, grease, and other stains
- allows the surfaces to breathe
- refreshes the look of surfaces and enhances colors
- does not affect the surface finish
- does not contain volatile organic compounds (VOC)
- easy to apply
- eco-friendly product
How to apply
Substrate preparation for the sealing procedure is completed with professional detergents. The surface must be fully dry and clean before application.
Always test the product in a less visible area before general application.
1. Apply in a thin layer on the surface, with a specific brush/cloth/pad/sponge, or by spraying, whatever the case may be. The temperature range recommended is 5-25 C degrees.
2. Spread it evenly over the surface.
3. After about an hour remove any residue from the surface with a microfiber cloth. For older and difficult residues, use warm water and soap.
4. On porous surfaces (brushed, glazed, bush-hammered, etc.) apply 2-3 coats every hour. On low porosity surfaces (polished, honed, tumbled, etc.) apply 1-2 coats. For claddings, apply from the bottom up.
5. The solution dries in a few hours, but cures in about 3 days.
Consumption polished surfaces: 1 L covers about 30 sqm
Consumption on low absorption surfaces: 1 L covers about 15 sqm
Consumption of high absorption surfaces: 1 L covers 7.5 sqm
Storage: 2 years in a sealed container, in a cool, dry place, away from fire and frost.
Packaging: 1 L and 5 L containers
Precautions: apply in the 5-25 degrees Celsius temperature range. Turn off underfloor heating.
Warning: Keep out of reach of children. Avoid contact with skin and eyes. In case of an accident or if you feel unwell seek medical advice immediately and show the label/container.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
