LTP External Stone Sealer is a water based impregnating sealer. A product recommended for exterior use, it is moisture-repellant and stains resistant. Besides, it is recommended for natural and artificial stone surfaces, concrete paving, brick and external masonry.
Benefits
• water-based product;
• prevents moss and mould formation;
• slightly enhances appearance;
• UV resistant;
• ideal for any stone surface, any type of finish;
Directions for use
Make sure the surface to be sealed is as clean and as dry as possible. If necessary, first wash it with a dilute solution of LTP Grimex.
First, test product on a less visible area, before general use.
1. Shake well before use.
2. Apply evenly on the surface with a foam roller / paint brush / mop or by spraying, if that’s the case. Optimum temperature range for applying the product: 5 – 25 °C.
3. Make sure product is even applied on the surface.
4. After one hour, remove any residual sealer if still visible.
5. For more absorbent surfaces, apply further coats of sealer at hourly intervals, until surface is completely saturated.
Consumption
Lower porosity surfaces: 1 L for 15 sqm
Higher porosity surfaces: 1 L for 8 sqm
Storage: Store in a cool, dry, frost free place.
Shelf life: 2 years for unopened containers.
Packing: 1 and 5 L recipients
WARNING: KEEP OUT OF REACH OF CHILDREN!
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
