LTP Mouldex Overview
LTP Mouldex is an intensive cleaner specifically designed to remove organic stains such as mould spores, fungus, algae, and moss from grout joints and stone surfaces. Ideal for wet areas, it is perfect for use in bathrooms and kitchens, both indoors and outdoors. Its bleaching action helps restore the original appearance of white grouting.
Benefits
- Suitable for both interior and exterior use on various finishes including polished, honed, brushed, split-faced, flamed, and sandblasted surfaces.
- Effective on surfaces with silicone seals and in wet spaces.
Product Features
Packaged in a 500 ml bottle, LTP Mouldex weighs approximately 0.8 kg per unit. It should be stored upright in a cool, dry, and frost-free environment. For optimal results, use within 6 months of opening.
Recommended Usage
Before application, ensure the surface is completely dry. Shake the bottle well, hold it upright, and spray 5-10 cm from the surface. Allow the product to react for 45 minutes, then apply water and scrub with a stiff brush. Rinse thoroughly with a sponge and water. For stubborn stains, extended treatments are recommended, allowing the solution to sit overnight.
Application Instructions
Coverage is approximately 5-15 sqm depending on the type of cladding. Do not use in combination with acid-based cleaners. Equipment and surfaces in the food industry must be rinsed thoroughly with potable water after using LTP Mouldex.
Safety and Precautions
LTP Mouldex is very toxic to aquatic life. Avoid contact with skin and eyes. In case of eye contact, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting and seek medical advice immediately, keeping the label or container at hand. Keep out of reach of children.
Need help estimating the type of solutions and quantity needed for your surfaces? Use the LTP Calculator to configure the right amount of professional solutions for your surface.
