LTP Solvex is a cleaner specifically formulated to remove residues of wax, silicones, acrylic and polyurethane sealers plus residual epoxy grout. It is recommended for natural stone surfaces (marble, granite, travertine, slate, quarry tiles, flagstone) glazed ceramics and terracotta.
Benefits
• for interior or exterior use
• powerful non-caustic stripper
• non-corrosive
• removes silicone and acrylic waxes
Directions for use
Always test solution on a less visible area, before general application. Transfer solution into a glass / metallic container, to avoid plastic.
• apply solution with a cloth / pad / brush directly over surfaces of max. 5 sqm, to be able to control its action.
• allow to react for 30 minutes, while keeping the surface moist. Do not brush.
• use a brush / abrasive pad to remove softened coating from the surface.
• wash it with diluted solution of LTP Grimex and rinse well with plenty of water. Repeat until removing all residues.
• allow surface to dry (24 hours)
• re-seal the surface
Coverage
Light stripping: approx. 8 sqm / L
Deep stripping: approx. 5 sqm / L
Storage: up to 5 years for sealed containers, stored in a cool, dry place, frost-free environment.
Packaging: 1 L and 5 L can
Precautions
Apply within temperature range of +5 … +25 ° C, making sure to avoid prolonged contact with the joints filled with epoxydic grout. Protect acrylic surfaces. Avoid dripping of viscous solutions when applied on vertical surfaces.
WARNING
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes. If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
