LTP Profesional Colour Intensifier, color-intensifying waterproofing for natural stone, 500 ml

Professional colour-intensifying sealant for natural stone

LTP Profesional Colour Intensifier is an advanced impregnator, specially formulated to protect and enhance the appearance of natural and artificial stone, as well as ceramic, concrete, brick or quarry stone surfaces. The product is ideal for unpolished surfaces and can be used both indoors and outdoors, providing a colourless finish that intensifies the shade of the treated material.

Benefits and advantages

• Protects surfaces against dust, water, grease and various stains
• Allows the material to breathe, preventing mould from forming
• Effective in damp rooms and high-traffic areas
• Revives and enhances the natural colour of the cladding
• High resistance to wear and to external factors
• Extended durability: hard to remove once cured

Technical characteristics

Colour: colourless
Packaging: 500 ml container
Weight: 0.527 kg
Indicative coverage:
– low absorption surfaces: 1-2 l/10 sqm
– high absorption surfaces: 3-4 l/10 sqm
Storage: up to 4 years in a sealed container, in a cool and dry place, away from fire and frost.

Recommended uses

LTP Profesional Colour Intensifier is suitable for walls and floors in bathrooms, kitchens, living rooms, bedrooms, hallways, garages, terraces, balconies, facades, plinths, paving, swimming pools, fireplaces, stairs, countertops and window sills. It can be used on any type of natural stone, including travertine, marble, slate, limestone, sandstone, granite, river stone, basalt or sintered stone.

How to apply

Before application, the surface must be cleaned and dried completely, preferably with detergents specific to natural stone. We recommend testing the product on a less visible area before general application. Apply a thin coat with a brush, cloth, dedicated pad, sponge or by spraying, at a temperature between 5 and 25°C. After application, even out the coat and leave it to work for 15-30 minutes, then remove any residue. On porous surfaces, or to enhance the colour further, a second coat can be applied 30-60 minutes after the first. The surface dries in 2 hours and full curing takes about 3 days.

Maintenance and precautions

To maintain its effectiveness, treated surfaces should be cleaned with mild detergents, avoiding acidic or abrasive solutions. The product must only be used in well-ventilated spaces, away from sources of fire and heat. It is flammable and may cause drowsiness or dizziness; avoid contact with skin and eyes and keep out of the reach of children. In case of eye contact, rinse immediately with water and seek medical advice. Wear gloves and eye protection during application.

Support and useful tools

To calculate the quantity you need and to configure the right professional solutions for your project, use the LTP Calculator.