Flexible kit used for grouting marble, travertine, slate, granite, natural stones, tile and hone which have joints sizing 2 – 20 mm in width.
Cement based powder with added silicone, additives and pigments. It contains additives against fungi and the formation of cracks. Increased flexibility, resistant to water and decoloring, easy to clean.
Click here for full color palette
The supporting surface:
It can be used in wet or dry enclosures, for showers, kitchens, bathrooms and commercial spaces with high pedestrian traffic as well as for heated floors.
Grouts must be cleaned of dust and mortar. Before grouting we recommend waiting 24 hours since the cladding of the wall or floor.
How to use:
Pour 5kg of Weber.Color Perfect in approx. 15 liters of water until you get a plastic homogeneous mortar without lumps. Homogenization can be achieved using an electric mixer or a trowel. After obtaining a homogeneous paste, let it sit for 5 minutes then thoroughly mix again.
The obtained mortar is applied onto the open network of joints using the rubber trowel or squeegee until the joints are filled properly. The excess material is removed with a damp sponge float. After an appropriate 5-10 minutes waiting time, depending on the weather conditions on site, wash diagonally onto the joint section with a wet sponge. Washing will be made in such a way that the joints will remain filled and smooth.
Freshly filled joints will be kept away from
Sunlight, rain and frost
Applying temperature: between 5 C to 30 C degrees
Please respect the recommended water quantity
Other using features:
Waiting time after mixing: 5 min
Time for application: 1-5 h
Claddings can be used after: 24 h
These time parameters are given for a temperature of 20 ° C and a relative air humidity of 65%. Higher temperature values shorten these times while lower ones increase them. It contains cement. Has an alkaline reaction when mixed with water. Protect eyes and skin. In the case of eye contact, wash with plenty of water and ask for the doctor’s advice.
Compression resistance: 15 N/mm2
Tensile strength in bending: 3-5 N/mm2
Abrasion resistance: 1000 mm3
Water absorption (after 30 min): 2 g
Water absorption (after 240 min): 5 g
Contractions: ≤ 2 mm/m
24 months since the date of manufacture when stored on wooden pallets in dry conditions
About 0 5 kg/sqm
Color palette: download here
137A Teisani Street, Bucharest - ROMANIA
Our schedule (GMT +02:00 Europe): Monday - Friday: 09.00-18.00 Saturday: 10.00-15.00
Subscribe to our Newsletter for updates: