LTP Grout Stain Remover, a professional product which removes all traces of grout, mortar, cement or rust from the surfaces resistant to acids. Test the solution on a less visible area before applying it on the whole surface. Shipped internationally.
Benefits of LTP GROUT STAIN REMOVER
Removes adhesive, grout and limescale residues
Removes rust residues.
Perfect for both interior and exterior.
Quick action cleaning agent
Directions for use:
In mild cases and on absorbent tiles:
Dilute 1 part Grout Stain Remover in 4 parts warm water. Apply with a cloth or sponge wrung out in the solution. Wipe off thoroughly with a clean damp cloth.
In more severe cases:
Dilute 1 part Grout Stain Remover in 1 part warm water. Apply liberally and spread over surface of tiles. If necessary, agitate with a scrubbing brush and leave to react for 5-10 minutes, keeping wet with additional Grout Stain Remover solution. Mop up and rinse thoroughly with clean water.
In extremely severe cases:
Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.
With one liter of this product you may clean about 5-25 sqm.
Notes:Not suitable for use on surfaces that are calcareous, sensitive to acids (e.g. stainless steel, chrome, enamel etc), or contain lime (i.e. marble, travertine, limestone, engineered stone & sandstone containing iron). In conditions of extreme humidity LTP Grout Stain Remover vapour may react with acid sensitive urfaces. Any contaminated surface should be rinsed off immediately with plenty of clean water. Do not use when under floor heating systems are in operation.
For cleaning and removing the lacquer you have to apply LTP Solvex. Then clean the surface well, allow it to dry and apply 2 or 3 coats of LTP Mattstone (powerful sealer – maximum protection without modifying surface look).
137A Teisani Street, Bucharest - ROMANIA
Our schedule (GMT +02:00 Europe): Monday - Friday: 09.00-18.00 Saturday: 10.00-15.00
Subscribe to our Newsletter for updates: