With the newest technology which seals on a nano-level structure, penetrating deep into the material, LTP MPG is the professional solution for natural stone marble, travertine, granite, limestone, slate and tiles with polished finish. Suitable for indoor and outdoor use (polished floors, walls and countertops). Does not change the look of natural stone. International fast delivery courier available.
Benefits of using LTP MPG
Latest protection technology on a nano-structure level
Maximum protection against water, oils and fats
The ideal product for countertops and granite or marble claddings
Perfect solution for exterior or interior use
Suitable for buffing machine application
How to use:
Ensure surface is clean, dry and free from contamination.
If necessary, first clean surfaces with LTP Grimex and allow to fully dry (24 h).
Apply thinly and uniformly using a soft cloth or sponge. Within 20 mins, whilst the sealer is still wet on the surface, buff well using a clean dry cloth or buffing machine. Leave to dry for 4 hours and then on more porous surfaces apply a second coat using the same method. It is important to remember to remove any excess from the surface and buff well between each coat.
Do not apply in temperatures exceeding 25 degrees C. Use only in well ventilated areas. Ensure underfloor heating is switched off. Over applied and un-buffed sealer will dry and leave a greasy residue on the surface. To remove, apply white spirit or a little more sealer then buff immediately. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application. Treated areas should be dry enough to walk on after about 4 hours but will take 3 days to become fully water resistant.
Coverage:
1L = 15 sqm depending on surface porosity.
Maintenance:
Use LTP Floorshine for floors and LTP Stonewash for walls. For stubborn surface marks use LTP Grimex, in which case you may need to re-seal treated areas. Do not use strong bleach cleaners for routine maintenance.