LTP Colour Intensifier was designed to seal the natural stone surfaces, while enhancing colors. It is recommended for different surfaces (slate, marble, travertine, terracotta, limestone, oriental terrazzo etc.). LTP Colour Intensifier offers protection against water, grease stains and dirt, while allowing stone surfaces to “breathe”. Available for online order, product can be shipped by carrier with cash at delivery.
Benefits of LTP COLOR INTENSIFIER
Enhance natural stone color with unpolished finish without providing it a ''just washed look''
Designed especially for wet spaces (bathrooms, saunas etc.)
Allows surface to 'breathe'
Suitable for both interior and exterior use
Directions for use:
The surface to be treated must be completely clean, dry and free from contamination. If necessary, first clean floor with LTP Grimex (6:1 dillution) and allow it to dry thoroughly. Apply this sealer thinly and evenly with a cloth, brush or sponge and allow to react for approximately 15-30 minutes before wiping over with a clean dry fluff-free piece of cloth to remove all and any excess which may remain on the surface.
Please note:
The surface must retain a natural finish after treatment. Any excess left on the surface could oxidize to form an unsightly gloss varnish. For stronger color enhancement and in the case of more absorbent surfaces, further coats may be applied. Allow at least 30-60 minutes from application of previous coat before applying further coat. Do not apply in direct sunlight or at temperatures above 25˚C. Use only in well-ventilated areas. Pay attention with underfloor heating as the product may dry prematurely. When in doubt, test first on an inconspicuous area, prior to general application.
Consumption:
Approximately 5-10 sqm / liter depending on the porosity of the surface
Maintenance:
Routinely sweep the floor and wash it with LTP Waxwash. Clean walls and work surfaces with LTP Stonewash spray. For further information, refer to the technical data sheet.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
