Colour Intensifier is an impregnating sealer with color enhancing features. It is recommended for interior and exterior use, on unpolished surfaces of natural and artificial stone, ceramic tiles, concrete, brick and quarry. To be used on wall and floor surfaces in bathrooms, kitchens, living rooms, bedrooms, hallways, garages, terraces, balconies.
Benefits
• protects surfaces from dust, water, grease and many stains
• allows surfaces to breathe
• efficient in wet spaces
• recommended for refreshing the dull look of any cladding
• very resistant, difficult to remove once hardened
Directions for use
Always test the product in a less visible area, before general application.
1. Apply in a thin coat over the surface with a brush / cloth / pad / sponge, or by spraying, as the case may be. Apply in the temperature range of +5… +25 °C.
2. Make sure the coat applied is even.
3. Leave 15-30 minutes before wiping the residues from the surface.
4. Repeat the procedure for higher porosity surfaces or for color enhancing purposes. Allow at least 30-60 minutes before applying a further coat of solution.
5. The solution is dried within 2 hours, but it takes approximately 3 days to cure.
Consumption
Lower porosity surfaces: 1-2 L / 10 sqm
Higher porosity surfaces: 3-4 L / 10 sqm
Storage: up to 4 years for sealed containers, in a cool, dry place, frost-free environment.
Packaging: 1l and 5l containers
Precautions: to be applied in the temperature range of +5… +25 °.
Use only in well-ventilated areas (flammable liquid and vapors).
WARNING
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes. May cause drowsiness or dizziness! Harmful for aquatic life with long lasting effect. Avoid contact with skin and eyes! If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
