Glaze Protector is a surface sealer for interior use only. Apply on dry non-porous surfaces (ceramic tiles and natural stone).
Benefits
• protects surfaces from dust, water and staining
• film forming sealer with a “just washed” look
• easy to maintain
Directions for use
Make sure the surface to be treated is completely clean, dry (joints included) and free from cements or grout stains (use professional cleaners). Always test the product on a less visible area, before general application.
1. Apply using a cloth soaked and wring out of the surplus solution.
2. Apply evenly to the surface without rubbing.
3. Allow surface to dry for 1 hour.
4. Check to see the look of your surface.
5. Apply a second coat and then after 1 more hour of waiting you can apply a third coat. Usually after 3 layers, the thin film is visible.
6. For a glossier finish you can apply further coats up to maximum 6.
7. Allow to dry for approximately 1 hour until it hardens, yet will take a further 3 days to achieve full hardness.
Coverage: 1L / 30-40 sqm, depending on surface porosity
Storage: up to 4 years for sealed containers, in a cool, dry place, frost-free environment.
Packaging: 1 and 5 L containers
Notes
• always test first to establish the suitable method for application and the optimum number of coats before general application
• DO NOT OVER APPLY, as too many coats will cause unsightly build up and/or reduce the efficiency of the product
• DO NOT apply in wet spaces or shower enclosures
Precautions
Recommended use: within temperature range +5… +25 °.
WARNING
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes. Avoid contact with skin and eyes! If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
