Ironwax Satin is a surface sealer, suitable only for indoor use, in dry spaces and surfaces such as natural stone with saw cut finish, brick, concrete, ceramic tiles, terracotta, terrazzo.
Benefits
• protects surfaces from dust, water and staining
• satin finish film forming acrylic sealer
• makes maintenance easy
Directions for use
Make sure the surface to be treated is completely clean (use professional cleaners) and dry (joints included) with minimum 24 hours before applying the product.
Always test the product on a less visible area, before general application.
Depending on substrate porosity, the solution is applied with a cloth / pad, for low porosity (honed) surfaces or with a brush / sponge, for high porosity surfaces (e.g. brushed, flamed, bush hammered, sandblasted etc.). After application, spread it even, without rubbing the surface.
1. After applying the first coat, allow the surface to dry for an hour.
2. Check surface to see the evenly thin film created.
3. Apply a second coat; then after an hour you can also apply a third. Usually, after 3 coats, the protective film is visible.
4. Further coats may be applied for higher sheen (maximum 6).
5. Allow it to dry for 1 hour until it hardens and then 3 days more for full hardness.
Coverage
1L / 15-30 sqm, depending on surface porosity
Storage: up to 4 years for sealed containers, in a cool, dry place, frost-free environment.
Packaging: 1 and 5 L containers
Notes
• always test first to establish the suitable method for application and the optimum number of coats before general application
• DO NOT OVER APPLY, as too many coats will cause unsightly build up and/or reduce the efficiency of the product
• DO NOT apply in wet spaces or shower enclosures
Precautions
Recommended use: within temperature range +5… +25 °.
WARNING
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes. Avoid contact with skin and eyes! If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
