LTP Mattstone H20 is a water-based impregnating sealer for all types of natural and artificial stone, quarry, brick, concrete and paving. It strongly repels water, oil and grease and it helps protect against staining.
Benefits
• water-based impregnating sealer
• slightly enhances color
• for natural stone surfaces, regardless of finish
• allows surfaces to breath
Directions for use
Surface to be sealed must be cleaned with specific detergents. Always test solution on a less visible area, before general application.
1. shake can well before use.
2. apply over surface with a brush / paint roller / mop / directly or by spraying, based on working conditions. Apply within temperature range of +5 … +25 ° C.
3. make sure to obtain a uniform finish all over the surface.
4. remove any residual sealer after one hour by rubbing with a dry micro-fiber cloth.
5. apply further coats at 1 hour interval on porous surfaces, until surface is completely saturated. After 1 hour remove any excess sealer with absorbent towels.
Coverage
Low absorption surfaces: 15 sqm / 1 L
High absorption surfaces: 8 sqm / 1 L
Polished surfaces: 25 sqm / 1 L
Storage: up to 2 years for sealed containers, stored in a cool, dry place, frost-free environment.
Packaging: 1 L and 5 L can
WARNING: KEEP OUT OF REACH OF CHILDREN!
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
