LTP Mattstone is a natural finish impregnating sealer for interior and exterior use. Recommended for honed surfaces of natural and artificial stone, unglazed ceramic tiles, concrete, brick, quarry stone. It is used on walls and floors in bathrooms, kitchens, living room, bedroom, hallway, garage, terraces, balconies.
Benefits
• protects surfaces from dirt, water, grease and staining
• allows surfaces to breath
Directions for use
Surface to be sealed must be cleaned with specific detergents. Plus, it should be completely dry and clean. Always test solution on a less visible area, before general application. Shake can well.
1. apply a thin coat with a brush / cloth / specific pad / sponge directly over surface or by spraying, based on working conditions. Apply within temperature range of +5 … +25 ° C.
2. make sure to obtain a uniform finish over the surface.
3. remove the residues still visible on the surface after one hour.
4. repeat the procedure for very porous surfaces. Apply a second coat, yet not before 2 hours from the first.
5. allow surface to dry for 2 hours, but keep in mind that it will take 3 days to reach its full potential.
Coverage
Low absorption surfaces: 10 sqm / 1-2 L
High absorption surfaces: 10 sqm / 3-4 L
Storage: up to 4 years for sealed containers, stored in a cool, dry place, frost-free environment.
Packaging: 500 ml,1 L, and 5 L can
Precautions
• apply within temperature range of +5 … +25 ° C, only in well ventilated areas (flammable liquid and vapors)
• keep away from water at least 3 days
• do not apply under direct sunlight
• for high porous surface, keep in mind to apply also a surface sealer.
WARNING
KEEP OUT OF REACH OF CHILDREN! Avoid contact with skin and eyes. May cause drowsiness and dizziness! Repeated exposure may lead to dry /cracked skin. If in eyes: rinse immediately with plenty of water and seek medical advice. Wear suitable gloves and eye protection. If swallowed, do not induce vomiting. In case of an accident or if you feel sick, seek medical advice at once and keep the label / container at hand.
Do you need help to estimate the type of solutions and quantity needed for your surface(s)? The LTP Calculator helps you to configure the right amount of professional solutions for your surface, click here LTP Calculator
